https://members.theihe.org/forums/posts.aspx?group=245536&topic=1708039 Sun, 7 Jun 2026 11:53:01 GMT Fri, 16 Sep 2022 09:56:33 GMT Copyright © 2022 Institute of Highway Engineers https://members.theihe.org/forums/posts.aspx?group=245536&topic=1708039 https://members.theihe.org/forums/posts.aspx?group=245536&topic=1708039 Fri, 16 Sep 2022 10:55:35 GMT https://members.theihe.org/forums/posts.aspx?group=245536&topic=1708040 https://members.theihe.org/forums/posts.aspx?group=245536&topic=1708040
Hi Jo,

Is there anything preventing the site being converted over to an IP connection? That way you can just use the on-board browser remotely.

It is a LOT easier!]]> Fri, 16 Sep 2022 10:55:55 GMT https://members.theihe.org/forums/posts.aspx?group=245536&topic=1708041 https://members.theihe.org/forums/posts.aspx?group=245536&topic=1708041
Hi Chris,
Sorry, just picking up on this again. Our sites are all IP and were checked at the start of the year by the OTU supplier. Their advice, without having visited this particular site (even though the engineer took a trip down here?) and accessing it remotely, was that it could be the baud rate in the PTC-1.]]> Fri, 16 Sep 2022 10:56:12 GMT https://members.theihe.org/forums/posts.aspx?group=245536&topic=1708042 https://members.theihe.org/forums/posts.aspx?group=245536&topic=1708042
Hi Jo,

The default BAUD rate in the PTC-1 is 9600
It can be changed with the BDR command or via the Web Interface

You need the Correct RS232 Cable Form from Siemens that is wired for Loop-back as there is no handshaking in the Peek Controllers
667/1/26579/001

Also check the settings in the Gemini – See CBR Command]]> Fri, 16 Sep 2022 10:56:33 GMT